How To Put On The Canon Camera Strap

If you are looking to take your photography to the next level and want to learn how to put on the canon camera strap, then this article is for you! In this article, we will teach you how to put on the strap, using the right techniques and positioning. Following our tips will ensure that your camera is always secure and that you can take beautiful photos without worrying about it falling off your shoulder.

Attach a Neck strap to your DSLR camera…The Canon way!!!


How to Put On the Canon Camera Strap

First, make sure you have the correct camera strap. The Canon EOS Rebel T6s camera strap has a different buckle than the Canon EOS Rebel T6i camera strap. If you have the T6i camera strap, you will need to get a T6s camera strap adaptor.

To put on the camera strap, first make sure the camera is turned off. Next, open the battery cover and remove the battery. Finally, remove the memory card and SD card. Next, unclip the camera strap from the camera body. Make sure the black clip is on the camera strap and the white clip is on the camera body. Slide the camera strap over the shoulder and tighten the black clip. Slide the camera strap over the neck and tighten the white clip.

That’s it! You’re ready to take pictures.

The Best Way to Put On Your Canon Camera Strap

Assuming you have your camera strap properly fitted to your camera body, the first step is to thread the strap through one of the camera strap loops on the body. Make sure the strap is threaded through the loop in the same direction as the camera’s lens barrel.

Once the strap is threaded through the loop, hold the strap in one hand and loop the free end of the strap over the top of the loop on the camera body. The bottom of the strap should now be resting on top of the camera body.

Finally, thread the excess strap through the other loop on the body and hold it in your other hand. Now, pull the strap tight, making sure it’s evenly tensioned across both loops.

To secure the strap, gently press down on one of the grip buttons on the camera body. This will cause the strap to tighten, and the grip buttons will grip the strap securely. repeat on the other side.

How to Wear Your Canon Camera Strap

Putting on a Canon camera strap is a simple task, but can be difficult to do correctly. Follow these steps to ensure a good fit:

1. Adjust the length of the strap to fit your body. It is important to make sure the strap is long enough to comfortably cradle your camera body.

2. Loop the strap around your wrist and pull it tight.

3. Cross the strap over the top of your camera body, then pull it tight again.

4. Make sure the strap is positioned so that it rests comfortably against your shoulder. If the strap is too tight, it may cause pain and discomfort. If the strap is too loose, the camera may move around and become unstable.

How to Use Your Canon Camera Strap

In order to use your Canon camera strap, ensure that the strap is properly fitted to your camera body. The strap should be tight enough to keep the camera secure, but not so tight that it impedes movement. To fit the strap, adjust the length to the desired length and then screw the buckle closed. After fitting the strap, make sure that the camera is properly positioned on your shoulder and tighten the strap by pulling it through the buckle.

How to Adjust Your Canon Camera Strap

By now, you are probably wondering how to adjust your Canon camera strap. Well, here is a detailed guide on how to do just that.

1. Start by ensuring that your camera is properly mounted on your tripod or shake-proof stand.

  1. Fold the camera strap in half so that it forms a loop.
  2. Thread the strap through the loop, making sure it is long enough to cover the full length of your camera.
  3. Pull the strap tight to secure it in place. You may now optionally loop the excess strap around your hand or arm for added stability.
  4. Next, adjust the length of the strap by loosening it slightly and pulling it towards the camera. You may then re-tighten the strap to your desired length.
  5. Finally, make sure the camera is properly positioned on your shoulder and tighten the strap to ensure a secure fit.


Canon camera straps are essential for taking great photos. Follow these simple steps to put on one:

Author: Eshant

My journey toward photography has been an interesting one. I started with a very basic DSLR camera, and after several years of experimentation with its manual settings, I finally made the jump to single-lens reflex (SLR) cameras. Being a photographer is not just about having a camera or being able to take pictures well. It requires the ability to process information from raw data, which is why I am passionate about learning things and implementing them in real life. Hey! I am Eshant, an 18-year-old student from India who loves blogging and photography. I was born and raised in Haryana India but moved to Chandigarh for education when I was 14 I want to be able to utilize my skills in both online and offline businesses so that's why I'm learning about internet marketing and my goal is to start a blog. I am passionate about learning new things, hence why I love blogging too. Please feel free to contact me via email or twitter if you have any questions!

Leave a Reply

Your email address will not be published. Required fields are marked *