How To Put A Canon Camera Strap On

Canon cameras come with a variety of straps to hold the camera. There are built-in straps, but often these can be difficult to remove or adjust.

A canon camera strap can be attached in a few different ways. One is to use the strap release button on the camera. Another is to use the strap lugs on the camera body.

Attach a Neck strap to your DSLR camera…The Canon way!!!

[ytvideo]

How to Attach a Canon Camera Strap
Step

1. If you are using a Canon camera strap with a quick-release buckle, ensure that the buckle is in the closed position.
2. If you are using a Canon camera strap with a screw-on buckle, first loosen the screw by turning it counterclockwise.
3. Now slide the strap over the screw and tighten the screw by turning it clockwise.
4. Be sure to keep the strap tight against the camera body in order to avoid losing balance or camera control in the event of a fall.

by

Putting a canon camera strap on can be a bit of a challenge, but with a little bit of understanding and a few simple steps, the process can be successfully completed.

First, ensure that the camera is securely mounted to the body of the camera. This can be done by securing the camera to the tripod, or by using the included strap mount. Next, make sure that the strap is long enough to reach the camera from the body of the camera.

To put the strap on, thread the strap through one of the strap mounts on the camera body and then thread it through the other strap mount. Make sure that the strap is tight enough so that it doesn’t move around, but not so tight that it damages the camera.

Finally, take the other end of the strap and thread it through the handle of the camera, making sure that the strap is tight enough so that it doesn’t move around.

Step Instructions for Attaching a Canon Camera Strap
How to Securely Attach a Canon Camera Strap
Tips for Attaching a Canon Camera Strap
How to Adjust a Canon Camera Strap

1. Ensure the camera is in “P” mode and lens is extended.

   2.Thread the strap around the camera body as close to the button as possible and pull until tight.

   3.Rotate the strap around the body until it is in the desired position.

   4.Before using the camera, adjust the strap to ensure a comfortable, secure grip.

   5.To release the strap, press the button on the strap and pull the strap towards the camera body.

Conclusion

Putting a canon camera strap on is easy once you know how. Start by threading the strap through the camera’s tripod screw and then thread it through the other end of the strap. Make sure the screw is facing the camera and tighten the screw with a screwdriver.